Capturing RF Signals

With Waiver 2.0, you can capture worldwide broadcasting standards of Radio (AM, FM, RDS, DAB, HD Radio, XM Sirius) and DTV (ATSC3, DVB-T/H, DVB-T2/S2, DVB-C, DMB, CMMB, DTMB, ISDB-T/B, OpenCable, and ATSC-M/H). Also, you can capture radio broadcasting ATV (NTSC, PAL), RDS, TMC, LTE, Bluetooth, and Wifi. Waiver is equipped with a GPS module for accurate location information to evaluate the strength of the RF signal. Basically, you can capture any live signals and then playback wherever and whenever you need to.

 

 

Technical Information

The RF Down-converter can receive 0.1MHz – 2.7GHz RF signal and downconverts to 75MHz IF. Capture worldwide Broadcasting standards of DTV (FM, AM, ATSC, DVB-T/H, DVB-T2/S2, DVB-C, DMB, CMMB, DTMB, ISDB-T/B, OpenCable, and ATSC-M/H), Radio Broadcasting ATV (NTSC, PAL), RDS, TMC, LTE, Wifi.

Weiver is equipped with a GPS module for accurate locative information to evaluate the strength of the RF signal. The GPS information is stored in the NMEA protocol and the GPRMC information is stored in a second log file. An active Antenna GPS is used. Weiver via input port enables the incoming reference signal to be synchronized at 10MHz frequency.

 

100 KHz to 2.7 GHz

Waiver 2.0 can capture signals in the frequency range between 100 KHz to 2.7 GHz (max). As for bandwidth, you can stretch from 1 MHz to 56 MHz.

7KG Weight Portable 70W Low Power Consumption

WAIVER 2.0 is designed for lightness and portability, operable with vehicle cigar power without complex electrical add-ons.

Bias-Tee Option

Bias-Tee is a T-shaped component attached to the signal cable to supply power to the antennas.
Amplifier (LNA, TR, FET and etc) circuits are configured in close proximity to the antennas to improve receive sensitivity, and a separate DC power supply (DC) is required to activate these active elements

Testing Signals

Waiver 2.0 is capable of recording RF signals anywhere you are. It is perfect to test the RF sensitivity or receptor capacity of your devices. With 7kg of weight and 70 watts of low power consumption, Waiver 2.0 gives you great mobility in capturing RF signals.

 

Brouchure | More info  | Buy now 

HDMI to SDI Converter with Display
User Guide| Related Products

Now you can monitor HDMI video with ez-HSV+. Features you can check are audio bar, incoming resolution and scaled out the resolution. The ez-HSV+ comes with the capability to embed external audio as well to give you a more convenient way to plan your production scheme.

24/7 Video Monitoring

Through the 2.7 inch TFT LCD screen, you can monitor the incoming video and in/output source resolution.

Audio Level Meter

You can also check the sound through the audio level meter on the screen. No more worries with audio!

Wall mountable

ez-HSV+ comes with wall mounting brackets for installation. If you do not need these brackets, you can simply attach the brackets to the converter for later use.

Low Power Consumption

The Maximum power consumption of ez-HSV+ is less than 3 watts. Acceptable voltage ranges from 5v ~ 18v giving the user more flexibility in connecting power. You can also use a power bank to use this converter. More info…..

Microsoft Teams Rooms does not support HDCP input, which has been observed to cause issues with HDMI to ingest functionality (video, audio) when using a front or room TV display. A low-cost Workspace Controller can be used to enable these screens. More info Full article from Microsoft  Limitations and expected behaviors

Microsoft Teams Rooms does not support HDCP input, which has been observed to cause issues with HDMI ingest functionality (video, audio). Take care to ensure that switches connected to Microsoft Teams Rooms have HDCP options turned off.

If you desire a front of room display to automatically switch to an active video source (such as an MTR console) when the source wakes from standby mode, certain conditions must be met. This feature is optional but supported by Microsoft Teams Rooms software, provided underlying hardware supports the feature. A consumer TV used as a front of room display needs to support the Consumer Electronics Control (CEC) feature of HDMI. Depending on the dock or console selected (which might not support CEC, refer to manufacturer support documentation), a workspace controller such as an Extron HD CTL 100 may be needed to enable the desired behavior.

Always use a wired 1-Gbps network connection to assure you have the needed bandwidth.

If your Microsoft Teams Rooms device loses trust with the domain, you won’t be able to authenticate into the device and open up Settings. For example, if you remove the Microsoft Teams Rooms from the domain after it is domain joined, trust is lost. The workaround is to log in with the local Admin account.

The 64-bit version of Windows 10 Enterprise Anniversary edition (English language, version 1607) is no longer supported as of Microsoft Teams Rooms release 3.0.12.0.

Microsoft Teams Rooms is a multi-window application and requires a front of room display to be connected to the HDMI port of the device, for the app to function correctly. Make sure that you either have an HDMI display connected or use a dummy HDMI plug if you are testing and do not have a display purchased yet.