EXTRON DTP2 R 211

Next Generation, HDCP 2.2 Compliant 4K/60 4:4:4 DTP2 Receiver

DTP2 R 211 4K/60 HDMI Receiver with Audio De-Embedding

DTP2 Receiver supports the transmission of HDMI and multichannel audio, as well as bidirectional RS-232 and IR signals up to 330 feet (100 meters) over a shielded CATx cable. This HDCP 2.2-compliant product accommodates the full 18 Gbps data rate of HDMI 2.0b and supports video resolutions up to 4K/60 at 4:4:4 color sampling. Also, the stereo output is selectable between de-embedded or pass-through analog audio. The compact enclosure and features such as remote power capability make the DTP2 R 211 receiver ideal for discreet placement behind flat panel displays, with projectors, or wherever needed to meet application requirements.

Key Features

• Receives HDMI plus control and analog audio up to 330 feet (100 meters) over a shielded CATx cable
• A Supports computer and video resolutions up to 4K/60 @ 4:4:4
• A Stereo audio de-embedding
• Supported HDMI 2.0b specification features include data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, and HD lossless audio formats
• Support for HDR – High Dynamic
• Range video
• A HDCP 2.2 compliant
• A Remote power capability
• A Extron XTP DTP·24 shielded twisted pair cable is strongly recommended for optimal performance

DTP2 211 Tx/Rx
Specification
Frame rate1	24, 25, 30, 50, or 60 fps
Chroma sampling1	4:4:4, 4:2:2, or 4:2:0
Color bit depth1	8, 10, or 12 bits per color
Signal type	HDMI 1.4, 2.0b; HDCP 1.4, 2.2
Max. video data rate	18 Gbps (6 Gbps per color)
NOTE This product consists of a transmitter (DTP2 T 211) and a receiver (DTP2 R 211), sold separately, with twisted pair cables linking the transmitter and receiver.
NOTE  1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
Video
Maximum data rate	18 Gbps (6 Gbps per color)
Maximum pixel clock	600 MHz
Resolution range	2560×1600 @ 60 Hz or 1080p @ 60 Hz, 12-bit color, 4K (4096×2160) @ 30 Hz, UHD (3840×2160) @ 30 Hz, 4K (4096×2160) @ 60 Hz*, UHD (3840×2160) @ 60 Hz, (*4:2:0 color space)
Color bit depth	8, 10, or 12 bits — subject to the maximum data rate limit
Formats	RGB and YCbCr digital video
Standards	DVI 1.0; HDMI 1.4, 2.0b; HDCP 1.4, 2.2, CEA-861E
Video input — transmitter
Number/signal type	1 single link HDMI (or DVI-D*)
Connectors	1 female HDMI type A
NOTE            *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Interconnection between transmitter and receiver
Connectors	1 female RJ-45 per unit
Termination standard	TIA/EIA T568B
Signal transmission distance	Up to 330′ (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth, STP (shielded twisted pair)
NOTE       Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Video output — receiver
Number/signal type	1 single link HDMI (or DVI-D*)
Connectors	1 female HDMI type A
Audio
Gain	Unbalanced output: 0 dBu; balanced output +6 dBu
Frequency response	20 Hz to 20 kHz, ±0.5 dB
THD + Noise	0.03% @ 20 Hz to 20 kHz at maximum output
S/N	>90 dB, at maximum output (15 dBu), balanced (unweighted)
Stereo channel separation	>80 dB @ 1 kHz to 20 kHz
Audio input
Number/signal type	1 PC level stereo, unbalanced 1 Digital Embedded Audio on HDMI
NOTE       Analog audio can be configured for embedding onto the digital video signal at the Transmitter. Embedded digital audio can be (configured) de-embedded from the digital video signal at the Receiver end.
Connectors	(1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) (1) Female HDMI
Impedance	>10k ohms, DC coupled
Nominal level	-10 dBV (316 mVrms)
Maximum level	+7 dBV (unbalanced)
NOTE             0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type	1 stereo (2 channel), balanced/unbalanced
Connectors	(1) 3.5 mm captive screw connector, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.1 dB channel to channel
Maximum level (600 ohm)	>+11 dBu, balanced
Communication — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output
Transmitter	RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port)
Receiver	1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input
Transmitter	1 set of proprietary signals on a female RJ-45 jack
Receiver	RS-232 via a 3.5 mm, 3 pole captive screw connector
Baud rate and protocol	300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
Serial control pin configuration	1 = Tx, 2 = Rx, 3 = Gnd
IR control port	(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
IR control pin configuration	3 = Gnd, 4 = IR Tx, 5 = IR Rx
General
Power supply	External (included with Tx) Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 Watts
Power consumption
Transmitter
Device	TBD watts, 12 VDC
Device and power supply	TBD watts, 100-240 VAC, 50-60 Hz
Receiver
Device	TBD watts, 12 VDC
Device and power supply	TBD watts, 100-240 VAC, 50-60 Hz
NOTE                    Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.
Remote power capability	Supports one endpoint (DTP2)
NOTE                  DTP2 devices can only send power to other DTP2 devices. DO NOT send power to DTP devices or they will be damaged.
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Thermal dissipation
Transmitter
Device	TBD BTU/hr
Device and power supply	TBD BTU/hr
Receiver
Device	TBD BTU/hr
Device and power supply	TBD BTU/hr
Mounting
Rackmount	Yes, with optional 1U high rack shelf
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions
Transmitter	1.0″ H x 4.3″ W x 6.0″ D (quarter rack wide) (2.5 cm H x 10.9 cm W x 15.2 cm D) (Depth excludes connectors.)
Receiver	1.0″ H x 4.3″ W x 6.0″ D (quarter rack wide) (2.5 cm H x 10.9 cm W x 15.2 cm D) (Depth excludes connectors.)
Product weight
Transmitter	0.562 lb (.255 kg)
Receiver	0.529 lb (.240 kg)
Regulatory compliance	CE, C-Tick, FCC Class A, ICES, VCCI, KCC, c-UL, UL UL rated for use in plenum airspaces: meets UL for heat and smoke release, excluding the power supply.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE    Specifications are subject to change without notice.
(4622-D5)