Category: New Zealand

 “Not your average range of storage and carry cases”

Having heavily invested in R&D the resulting Tsunami range offers the industry a selection of Unique Cases that break the mould for Broadcast, Production, Storage, Post and Outside Broadcast.

An optionally Sized, Shaped and Colour Identifiable range of ruggedized cases with special features that ensure a waterproof, shockproof, dustproof containment. Manual pressure equalisation guards against moisture ingest via an O-ring seal.

The open cell core / solid wall design delivers a very strong yet lightweight container that includes pre-cut convoluted lid foam and quality Stainless steel fittings, delivering a Lifetime of excellence whilst remaining cost effective.

TeleDelta 1/2 Inch 50 Ohm Leaky Feeder / Radiating Cable

VHF – 50~2700Mhz range – suitable for Underground, Tunnels, Mining, In-building and Mobile Communications applications.

Mechanical Specifications:

• Environment: Underground and Above Ground Applications
• Temperature Range: -25 ~ +72 °C
• Conductor (Inner): 4.80mm +/- 0.2mm Diameter
• Conductor Material: Copper Coated Aluminium
• Conductor Insulation: 12.0mm +/- 0.5mm
• Insulation Material: PE – Physically foamed
• Conductor (Outer): 13.90mm +/0 0.5mm
• Conductor Material: Corrugated copper tube with radiating slots
• Jacket: 16.00mm +/- 0.4mm
• Jacket Material: Low Smoke Halogen Free Sheath – Colour: Black (Standard),
• Optional: Blue and Yellow
• Cable Weight: 0.19 kg /M
• Single / Continuous Bend Radius: 50mm / 345mm
• Min Recommended Bend Radius: 130.00mm
• Number Bends Typical: 40
• Recommended Hanger Spacing: 1.0m

Technical Datasheet can be found here:

Keywords: Radiating Cable, Radiax, Leaky Feeder

Setting a new benchmark in Broadcast Audio the new Linear Acoustic ARC Loudness Control System Provides a User-Definable Loudness Target with simple set up. The Linear Acoustic® ARC Loudness Control System featuring a state-of-the-art APTO® loudness adaptation algorithm from the Telos Alliance TV Solutions Group.

With much of the world’s television audio still delivered in stereo then high-quality loudness control shouldn’t be out of reach in regions where multi-channel audio, high channel density or coded audio aren’t necessarily required. ARC offers a key feature that matters most: The best possible audio and additional features, with broadcasters no longer needing to compromise between audio quality and affordability.

ARC (Automatic Real-time Control) supports two independent audio programs via AES, SDI, and Livewire+ AES67 I/O, making it fully compliant with SMPTE 2110. Its easy-to-use web-based user interface ensures a simplified remote experience on any device, browser, or OS.

Australasian Broadcasters already familiar with Linear Acoustic capabilities will appreciate the ARC’s “set and forget” LUFS output loudness target and selectable profiles, the system is embedded with next-generation television loudness processing in a compact 1RU package.

Extron is pleased to introduce the Extron SF 26PT, a two-way pendant loudspeaker for high performance program or music playback in high-ceiling and open-ceiling applications. Taking inspiration from modern pendant lighting, the SF 26PT offers an architecturally clean, patent pending design that complements the aesthetic of contemporary interiors. The SF 26PT is available in black or white and is paintable to fit in with any décor. The included Extron-exclusive PendantConnect™ speaker cable combines the speaker wires and steel support cables within a single outer jacket, providing a finished installation that is clean and secure. The UL listed SF 26PT offers both direct 8 ohm and 70/100 volt operation and is voiced similarly to the Extron SF 26CT for consistency and installation flexibility in mixed ceiling environments. The SF 26PT joins the SF 3PT to expand the line of Extron pendant speakers.

Key Features:

• 6.5″ (165 mm) long throw woofer
• 3/4″ (19 mm) ferrofluid-cooled dome tweeter
• Frequency range: 70 Hz to 20 kHz
• 8 ohm direct or 70/100 volt operation
• 92° conical dispersion
• 65 watts continuous pink noise
• 130 watts continuous program
• Architecturally clean, unobtrusive design using Extron exclusive PendantConnect PCC-2 speaker cable
• Optional Ceiling Surface Mount Kit available
• Similar voicing to the Extron SF 26CT ceiling speaker
• SF 26PT speakers are sold in pairs

Click Here to Learn More about the SF 26PT

The SF 26PT will be available in November 2018.  

Durable Plastic Hard Case For Test Equipment:

Hard case for telecommunications systems, enrollment devices

• Item NO.: 584433
• INTERIOR (LXWXD): 584*440*328mm(23”*17.3“*12.9”)
• EXTERIOR (LXWXD): 670*508*355mm(26.4“*20”*14“)
• Weight: 10.92kg(24lbs)
• Lid Depth： 55mm(2.16”)
• Base Depth: 273mm(10.75“)
• Material: TSU-1 Resin
• Temperature Range： -40℃~90℃
• Waterproof: IP67
• Warranty: Conditional Lifetime Guarantee
• Wheels： With

Certificate:

• Waterproof IP67-IEC60529 edition 2.2 Clause 13.6 and clause 14.2.7
• Impact resistance test – ATA300 revision 8.0 B-2-5
• Immersion test – MIL-STD-810 F Notice 3 method 512.4
• Low temperature test – IEC60068-2-1 Sixth edition
• High temperature test- IEC60068-2-2  Fifth edition

Extron is pleased to introduce the DA4 12G HD SDI, a compact four-output distribution amplifier for multi-rate SDI digital video signals. It supports all common serial digital video data rates up to 11.88 Gbps, while passing HDR, embedded audio, and other ancillary data allowed by the SMPTE and ITU standards. Automatic input cable equalization adds up to 984 feet (300 meters) for SDI, 787 feet (240 meters) for HD-SDI, 590 feet (180 meters) for 3G SDI, 295 feet (90 meters) for 6G SDI, and 230 feet (70 meters) for 12G SDI digital video, when using RG6 cable. Automatic output reclocking reshapes and restores signal timing at each output for added headroom when connecting multiple devices. The DA4 12G HD SDI is housed in a quarter rack width, metal enclosure, providing integration-friendly mounting options into both new and existing AV systems

Key Features:

• Automatically adapts to SMPTE and ITU digital video standards for SDI signals up to a 12G-SDI data rate
• Supports data rates from 270 Mbps to 11.88 Gbps
• Support for HDR – High Dynamic Range video
• Automatic input equalization
• Automatic output reclocking
• Passes ancillary data including HDR, embedded audio, closed caption, and time code
• Input rate LEDs
• Front panel USB configuration port

Click Here to Learn More about the DA4 12G HD-SDI

TeleDelta AESIP Series – AES / EBU Audio Distribution for IT / IP and IPTV Networks

Part of the TeleDelta x2IP Product Range, the AES2IP is a dedicated multichannel AES / EBU Digital Audio to IT/ IPTV and streaming encoder, designed for monitoring, distribution and delivery of Digital Audio services to one or more end-users devices within a private IT / IPTV or public Internet environment.

The scalable AES2IP platform can be ordered to meet customers requirements with each platform supporting up to 16x AES / EBU audio inputs.

AES2IP is a multi-format codec platform allowing operators to select desired encoding formats including AAC, AAC-LC, AAC-HE, AAC-HE2, MPEG2/L1 and MPEG2/L3 and assign output broadcast address and streaming bitrates.

AES2IP allows end-devices including PCs, monitoring devices, Professional Decoders / Receivers and IPTV settop-boxes to access and listen to AES2IP broadcast streams.

AES2IP is proudly made in Australia by TeleDelta.

 

AES2IP Datasheet can be found here:

TeleDelta Website can be found here:

The Lilliput FA1014C (FA1014C-CRS232) is a custom build Lilliput monitor for Australian deployments in the Courts, Corrections and Government sector.

Basic Specification:

• 10.1 Inch Capacitive Touch
• 16:9 Inch Aspect Ratio
• High Brightness
• Custom User Control and Interface
• RS232 Interface / Control Options
• Remote Monitor Power Control
• Source / Input Selection
• Feedback and Monitor Status / Reporting

Please contact AVW for information and pricing.

As the FA1014C was custom built for a specific Australian project it may not be suitable for all applications, please contact AVW to confirm compatibility before purchasing.

Extron is pleased to introduce the IN1806 4K/60 seamless presentation switcher. Combining cutting edge video and audio processing, signal extension, and networked control, the IN1806 sets a new benchmark standard for integrated scaling and switching. It incorporates Extron-patented Vector 4K scaling technology and features DisplayPort and HDMI inputs, an HDMI output and a mirrored Extron DTP2 output for extending video, audio, and control signals up to 330 feet (100 meters) over a shielded CATx cable. The IN1806 delivers excellent image quality, fast and reliable switching, along with Extron ProDSP audio processing, seamless video transition effects, logo keying, and HDMI loop-through. Designed for professional AV integration, the IN1806 may be controlled and configured via Ethernet, RS-232, and USB connections.

Key Features:

• Integrates DisplayPort, HDMI, and audio sources into presentation systems
• Advanced Extron Vector™ 4K scaling engine
• Supports signal resolutions up to 4K/60 @ 4:4:4 color sampling
• Supported HDMI 2.0 specification features include data rates up to 18 Gbps, Deep Color, and HD lossless audio formats
• HDCP 2.2 compliant
• Logo Image keying and display
• Selectable seamless switching transitions
• Stereo audio embedding and de-embedding
• Powerful integrated ProDSP™ 64-bit audio signal processing
• Integrated DTP2 output supports transmission of video, audio and control up to 330 feet (100 meters) over a shielded CATx cable
• RS 232 insertion from the Ethernet control port

Click Here to Learn More about the IN1806.

The IN1806 will be available in December 2018.